0-99 - relative Monitor cabinet door position (open vs. closed) with this magnetic sensor. Set alarms to alert when a secure cabinet has been opened. Standard lengths of 30' & 100' with custom lengths available upon request.
 |
RDPS | Door Position Sensor, 30' cord | $14.50 | |
|
|
RDPS-100 | Door Position Sensor, 100' cord | $21.50 |
0-99 - relative
Acts as a conductivity bridge to detect the presence of moisture or water in
your facility. Standard 20' cord length with custom lengths available upon
request.
|
|
RWS | Water Sensor, 20' cord | $43.00 | |
|
|
RWS-100 | Water Sensor, 100' cord | $65.75 |
0-99 - relative
Integrate smoke alarm functionality into your RacSense® system and receive
remote alarm notification. Kit features Kidde® 1275 with interface module and
5-15P straight-blade plug.
|
|
SA-1 | Smoke Alarm Kit | $90.75 |
0-99 - relative
This clever sensor is connected directly to your city power feed to alert you
when city power has been affected. Ideal for down-time prevention when PDU's
are connected directly to a UPS. Notification of a possible outage prior to
UPS battery exhaustion is critical.
This handy accessory enables connection of I/O devices into RJ12 jacks on RacSense® units. Device is programmed for the specific sensor and available for use with Geist I/O remote sensors.
With the advent of Liquid Cooling in datacenters, water has become increasingly integrated into the computer room environment. Industry trends show 27-31 % of data center outages/problems come from water related issues. Geist Water Sensing Cable Kits feature detection cables which sense the presence of water along the entire cable length. These kits are ideal for detecting moisture over a wide area such as the perimeter of a group of racks and cabinets. When connected to any Geist RacSense units with I/O ports, you can be alerted to potential dangers via email or SNMP traps. The WSCK-10 contains a 10' detection cable and the WSCK-40 contains a 40' detection cable.
Specifications
Plenum Rating: CL2P/CMP C(UL)
Sheer Strength: >180 Ibs.
Cut Resistance: >40 Ibs. with .005" blade
Abrasion Resistance: 60 cycles per UL 719
Connector: 4 pin, 0.96" diameter
Operating
Environment
Temperature; 32° to 167°F
Humidity: 5% to 95% RH, non-condensing
Altitude: 10,000 ft. max.
Storage:-22° to 185°F
Diameter of cable: not more than 0.25"
Weight: .02 Ibs/ft
| WSCK-10 10- WATER SENSING CABLE KIT | WSCK-40 40' WATER SENSING CABLE KIT | Additional cable lengths available. | |||
| 8700 | Interface Box | 8700 | Interface Box | 8706 | 10'Leak Detection Cable |
| 8701 | 15'Leader Cable | 8701 | 15'Leader Cable | 8707 | 25' Leak Detection Cable |
| 8704 | 10'Leak Detection Cable with EOL (end of line) connector | 8705 | 40' Leak Detection Cable with EOL (end of line) connector | 8708 | 50' Leak Detection Cable |
| 8714 | Power Supply, 6' length | 8714 | Power Supply, 6' length | 8709 | 100'Leak Detection Cable |
| 8715 | 50' Connection Wire (Interface Box to RacSense® I/O port) | 8715 | 50' Connection Wire (Interface Box to RacSense® I/O port) | 8710 | 10'Non Sensing Cable |
| 8702 | 10 pack, J Clips | 8703 | 25 pack, J Clips | 8711 | 25' Non Sensing Cable |
| 8712 | 50' Non Sensing Cable | ||||
| 8713 | 100'Non Sensing Cable | ||||
|
|
WSCK-10 | Water Sensing Cable Kit including components 8700, 8701, 8702, 8704, 8714, 8715 | $376.25 | |
|
|
WSCK-40 | Water Sensing Cable Kit including components 8700, 8701, 8703, 8705, 8714, 8715 | $521.75 |
Continuously track the charge of telephone batteries or cell phone system power with the -48VDCM or 30VDCM RacSense® sensors. Designed for telephony battery voltage monitoring and other applications requiring monitoring a DC voltage, these sensors monitor voltage via the 3 I/O inputs on RacSense® RSM, RSE2X16 and RSMINI163 units.
|
|
48VDCM | 48 Volt DC Battery Sensor | $82.00 |
Continuously track the charge of telephone batteries or cell phone system
power with the -48VDCM or 30VDCM RacSense® sensors. Designed for telephony
battery voltage monitoring and other applications requiring monitoring a DC
voltage, these sensors monitor voltage via the 3 I/O inputs on RacSense® RSM,
RSE2X16 and RSMINI163 units
|
|
30VDCM | 30 Volt DC Battery Sensor | $63.25 |
Copyright ISCDFW.COM, 1998-2012
Information Support Concepts, Inc.
Mansfield, Texas
ISC, Information Support Concepts, Inc. offers an Extensive Selection of Quality 19" and 23" Rackmount Enclosure Computer Racks, Server Cabinets, Server Racks, 2-Post and 4-Post Racks, LAN Racks, Portable Racks, Power, Rackmount LCD TFT Monitor Keyboards, Accessories and Much More for IT-Network-Telecom Professionals.