Power Over Ethernet PoE - PoE Splitter - Remote Display
Power Over Ethernet (PoE)
Power RSE, RSMINI and web cameras over Ethernet cable. Power over
Ethernet eliminates the need to run 110/220VAC power to wireless access points
and other devices on a wired LAN. Installers only need to run a standard CAT5
cable that will carry both data and power to each device. A PoE configuration
consists of two components; an injector and a splitter. The injector takes
data from an Ethernet hub and power from a wall outlet and outputs both data
and power through a CAT5 cable, The splitter is placed at the end of the CAT5
cable, returning data and power to their respective cables.
|
|
 |
POI-2000 |
PoE INJECTOR
|
$54.00 |
|
|
|
POS-1000 |
PoE SPLITTER
|
$36.75 |
Remote Display (RSD2X8)
The RSD2X8 local display is connected to a RSM, RCM, RCU or
RSP power strip and then mounted outside the cabinet for ease of viewing
user-selected critical data. This device eliminated the need to enter a secure
enclosure to see power and environmental monitoring readouts, A 10' RJ type
connection cord is included.
|
|
|
RSD2X8 |
2 line x 8 character LCD local display
|
$46.50 |
RJ12 16-Way Splitter (SPL16)
Multiply the power of your RSMINI with this compact 1 "U" 16-port splitter. Designed with four mounting holes for front or rear attachment of the RSMINI. Compatible with all RacSense® units with environmental monitoring.
|
|
|
SPL16 |
RJ12 - 16 Way Splitter
|
$93.50 |
RJ125-Way Splitter (SP-5)
Expand the number of sensors connected to your RacSense® unit. Especially
ideal for compact units such as the RSMINI.
|
|
|
SP-5 |
RJ12 - 5 Way Splitter
|
$5.50 |
TTS1U
This handy 19” rackmount diagnostic tool can be mounted near hot spots or carried by your technicians for convenient temperature spot checks near high heat producing equipment. Each unit contains a detachable 12' remote temperature sensor for precise placement. The digital display cycles between F and C readings with an accuracy of+7- ,5 C. This unit contains a low battery indicator and is powered by two AA batteries (not included) which are estimated to last one year.
Dimensions 1.72TI x 19"Wx .85T)
19" rack mountable unit - doubles as a filler panel.
|
|
|
TTS-1U |
Tiny Temp, 19" 1U Horizontal, Battery Powered Temp Sensor
|
$93.50 |
TTSMINI
Dimensions 1,72"H x 3.8"W x 1.1'D
|
|
|
TTS-MINI |
Tiny Temp, Mini Enclosure, Battery Powered Temp Sensor
|
$93.50 |
Plug-Outs (NPP-1)
NEMA Outlet Plugs - Safety Yellow
Bright Yellow outlet plugs for 15 Amps and 15/20 Amp 125V NEMA receptacles. Geist Plug-Outs contain an international "NO" symbol to discourage use of any unused outlets and help prevent circuit overloads. Typically the electrical load for installed PDU's should not exceed 80% of the unit capacity.
|
|
|
NPP-1 |
Yellow Receptacle Plugs - 12 per pack
|
$3.00 |
IECC-13 Retaining Clip (7759)
Minimize the opportunity for your cord sets to be
accidentally unplugged, For use with Geist IEC units with C-13 receptacles.
|
|
|
7759 |
C-13 Cord Retaining Clip
|
$0.75 |
IEC C-19 Receptacle & NEMA Duplex Cord Retaining Clip (7346)
Extra security for cord retention of NEMA C-20
plugs. For use with Geist 1.85" or 2.0" wide vertical units which feature NEMA
duplex or C-19 receptacles..
|
|
|
8954 |
NEMA Cord Retaining Clip (8954) - Extra security for cord retention of NEMA, IEC C-19, and RCM/RCU-O (C-19 & C-13) plugs.
|
$1.00 |
Cable Management Bracket (CMB-1)
Organize and secure cords to this practical bracket featuring numerous holes for use with cable ties. Enhance your installation by adding the CMB-1 to Geist 1U horizontal power strips featuring removable brackets. Adjustable horizontal mounting brackets are removable.
|
|
|
CMB-1 |
Cable Management Bracket
|
$35.50 |
This page contains part Number: POI-2000, POS-1000, RSD2X8, SPL16, SP-5, TTS-1U, TTS-MINI, 8124, 8125, 8126, 8127, 8128, 7349, 8068, 8129, 8175, NPP-1, 7759, 8954, CMB-1
